Research and Development in the Department Mechanical Engineering

Patents

Faculty Name Date of Patent Filed Patent Number Year
Gurpinder Singh 24/10/2017 201711037487 2017-2018
Gurpinder Singh 18/10/2017 201711037075 2017-2018
Ajay Kumar 15/10/2019 201711037075 2019-2020
Gurpinder Singh 28/8/2019 201911034689 2019-2020
Gurpinder Singh 31/10/2019 201911044118 2019-2020

 

Funded Projects

Projects Funded Agency
Lean Manufacturing Implementation Ministry of MSME

 

Consultancy Projects

Projects Funded Agency
Design & Development of Injection Moulding Dies Micro Instrument Company, Ambala
Design & Development of Injection Moulding Dies Advanced Micro Devices Pvt. Ltd., Ambala
Design & Development of prototype for new product Elinco Innovations
Design & Development of prototype for new product Acculab Industry

 

Research Publications

S.No Name of authors Title of the paper Name of journal/conference Volume & No. Year and month Pages
1 Jain, S.K. and Singh H Application of Statistical Process Control in Healthcare: A Case Study National Conference of Mechanical Engineering, Thapar University, Patiala 2008 148-153
2 Jain, S.K. and Bali, P.L. Evaluation of Patient Satisfaction in a Public General Hospital: A Case Study National Conference of Modern Trends in Engineering & Sciences 2009
3 Jain, S.K. and Bali, P.L. Application of Statistical Process Control Charts in Healthcare: A Case study International Journal of Science Technology & management Vol. 2, No. 2 2011 74-84
4 Prince, Satnam Singh, Mukesh Verma and Sarabjot Singh Micromechanical Behavior of Polymer Composite Material with Sharp and Curved Fiber/Matrix Interface using Finite Element Analysis International Journal of Applied Engineering Research, Vol.- 6 Issue – 18 2011 3186 – 3189
5 Satnam Singh and Prince Vibration Characteristics of Thermoplastic Composites American Institute of Physics, Vol.-1414 2011 211-214.
6 Prince, Satnam Singh and Vivek Chauhan Analysis of Polymer Composite with Varying Volume Fraction using Finite Element Modeling at Micro Level PSAT-2011 at JMIT, Radaur. 2011 ….
7 Amit Kumar Haldar, Satnam Singh and Prince Vibration Characteristics of Thermoplastic Composites ICM2ST-2011 Jaipur. 2011 ….
8 Prince, Satnam Singh, Mukesh Verma and Sarabjot Singh Micromechanical Behavior of Polymer Composite Material with Sharp and Curved Fiber/Matrix Interface using Finite Element Analysis IETET-2011 Kurukshetra. 2011 ….
9 Jain, S.K. and Ahuja, I.S. An evaluation of ISO 9000 initiatives in Indian industry for Enhanced manufacturing performance International Journal of Productivity and Performance Management Vol. 61, No.7 2012 778-804
10 Jain, S.K. and Ahuja, I.S. ISO 9000 Quality Management System: literature review and directions International Journal of Technology, Policy and Management, Vol. 12, No. 4 2012 312-343
11 Jain, S.K. and Ahuja, I.S. Application of analytical hierarchy process for justification of ISO 9000 implementation in manufacturing organisations International Journal of Business Continuity and Risk Management Vol. 3, No. 3, 2012 221–233
12 Prince, Mukesh Verma and Sarabjot Singh Analysis of Failure Phenomena in Multi- Fiber polymer composite material at varying volume fraction using Finite Element Modeling International Journal of Engineering Research and Application, Vol.- 2 Issue- 2 2012 287-291.
13 Satnam Singh, Prince and Amit Kumar Micromechanical Behaviour of Flexible Pavement under Combined Effect of Wheel and Thermal Load Condition NITTTR Chandigarh. …. 2012 ….
14 Prince, Sarabjot Singh and Satnam Singh Methods And Models For Failure Analysis of Fiber Reinforced Composites: A Review ICT-2012 at SSIET, Derabassi. …. 2012 ….
15 Prince & Satnam Singh Finite Element Analysis and Experimental Investigation of Debonding Behavior of Steel Fiber Reinforced Epoxy ICAM-2012 IIT (BHU), Varanasi. …. 2012 ….
16 Jain, S.K. and Ahuja, I.S. Strategies and Success factors for overcoming challenges in ISO 9000 implementation in Indian manufacturing industry International Journal of Technology, Policy and Management Vol. 13, No. 2 2013 121-139
17 Gupta, S. and Jain, S.K. Implementation of 5S in a Micro Scale Industry: A case study International Conference on Advances in Mechanical and Computer Engineering, GITM …. 2013 83-86
18 Singh, S., Kumar, P. and Jain, S.K An experimental and numerical investigation of mechanical properties of glass fiber reinforced epoxy composites Advanced Materials Letters Vol. 4, No. 7 2013 567-572
19 Jain, S.K. and Ahuja I.S Evaluation of ISO 9000 implementation aptness for Indian manufacturing industries using fuzzy simulation International Journal of Business Continuity and Risk Management Vol. 4, No. 2 2013 139–154
20 Jain, S.K. and Malik, A.K Relevance of lean manufacturing in Indian small scale industry International Journal of Business Continuity and Risk Management Vol. 4, No.2 2013 93–107
21 Gupta, S. and Jain, S.K A Literature Review of Lean Manufacturing International Journal of Management Science and Engineering Management Vol. 8, No.4 2013 241-249
22 Er.Satbir Singh, Dr. B.S Pabla, Dr. S.S Banwait IMPROVEMENT & ANALYSIS OF PRODUCTIVITY National Conference on Advances in Manufacturing Technology,NTTTR March 14 – 15, 2013 ….
23 I.C.Ramola Green manufacturing process towards agility”, National conference on Advancements in Mechanical Manufacturing Methods National Conference at Haryana Institute of Technology, Bahadurgarh. …. 2013 ….
24 I.C.Ramola Implementation of lean Manufacturing in Indian MSMEs: A literature review”, National conference on Advancements in Mechanical Manufacturing Methods National Conference at Haryana Institute of Technology, Bahadurgarh. …. 2013 ….
25 Bhupinder Singh & I.C.Ramola Study of mechanical properties for aluminium alloy (6061) by using different tool shapes in friction stir Welding” International Journal of Research in Engineering & Applied Sciences Volume 3, Issue 10, 2013  
26 Ashok Kumar, Gurpinder Singh Investigation of Mechanical Properties of 6063 Aluminium Alloy After Thixoforming Process International Journal of Mechanical Engineering and Research   2013 923-927
27 Ashok Kumar, Gurpinder Singh Evaluation of Flexural Strength of Epoxy Polymer Concrete with Red Mud and Fly Ash International Journal of Current Engineering and Technology Vol.3, No.5 2013 1799-1803
28 Prince, Satnam Singh and Pardeep Kumar Experimental investigations and finite element analysis of debonding behavior of steel fibre reinforced epoxy Elixir International Journal Vol. – 57 2013 14052- 14054
29 Pardeep Kumar, Narendra Kumar, Satnam Singh, PC Tewari Decision Support System for Critical Subsystems of a Beverage Plant CPIE2013,NIT Jalandhar CPIE2013_1509, March 2013 ….
30 Rupen Trehan, Satnam Singh and Manish Garg Optimization of mechanical properties of polyester hybrid composite laminate using Taguchi Journal of Materials Design and Applications Part L 2013 ….
31 Suraj Choudhary, & Parveen Saini Analysis of MRR and SR with different electrode for SS 316 on Die-Sinking EDM using Taguchi techniques Global Journals of Research in Mechanical & Mechanics Engineering Vol. 13, Issue 3 2013 ….
32 Suraj Choudhary & Parveen Saini Analysis of machining parameters for optimization of surface roughness of Stainless Steel AISI 202 in CNC face milling process International Journal of Mechanical Engineering Vol.2, Issue 3. 2013 ….
33 Kumar, R., Gupta, R.K., and Verma, M Performance analysis of a Process Industry to provide Decision Support System International Journal of Engineering Research and Technology, NCAEM-2013 Conference Proceedings 2013 137-142
34 Amit Arya, Jain, S.K. “Benefits of using ‘5S’ in small scale industry : A case Study” International Conference of Advance in Mechanical And Computers Jan 2013
35 Amit Arya, Jain, S.K. “A case study of achieving business excellence by implementing 5S in small scale industry” International Conference on “Sustainable business growth in turbulent times: opportunities and challenges” …. 2013
36 Anil Sharma ; Dr. S.K. Jain ; Dr. B.S. Pabla “ Utilization of Waste by Lean Manufacturing “ National Conference at NITTTR Chandigarh. May 2013 4
37 Gupta, S. and Jain, S.K. The 5S and kaizen concept for overall improvement of the organisation: a case study International Journal of Lean Enterprise Research Vol. 1, No. 1 2014 22-40
38 Sodhi, G.S, Jain, S.K. and Ahuja, I.S. The Evaluation of Contributions of Strategic Implementation of ISO Quality Systems in Manufacturing Organizations International Conference on Recent Trends in Electronics, Data Communication and Computing,Gurukul Vidyapeet Vol. 1, No. 2 2014 330-332
39 Ashok Kumar, Gurpinder Singh Investigation into the Machining Characteristics of Composites using Chemical Assisted Ultrasonic Machining Process International Journal of Current Engineering and Technology Vol.4, No.3 2014 1260-1264
40 Ashwani kumar, Deepak K. Choudhary and Prince Mechanical Properties of Epoxy Based Hybrid Composite of Glass and Banana Fiber Journal of Manufacturing Engineering Vol.- 9 Issue- 1 2014 049-054.
41 Narendra Kumar,Anish Sachdeva Green Manufacturing Process towards Agility:A Need of Hour Midas Touch International Journal Of Commerce, Management And Technology.A Monthly Referred E-Journal ISSN: 2320 – 7787 , Vol-2, No. 1 2014 188-193
42 Narendra Kumar, Vikas Chawla Automation and Greening:Two Important Pillars of Future Manufacturing Systems National Conference on Recent Advances in Science & Technology(NCST-2014) BKIT,Bhalki(Karnatka) E-055/1 Mar. 22-23 2014 ….
43 Suraj Choudhary & Ravi Duhan Effect of different fluxes on hardness and microstructure of SS 304 in GTAW International Journal of Mechanical Engineering Vol.3, Issue 4, 2014  
44 Kumar, R., Kumar, P., Nishant and Joshi, A Maintenance Strategy for Beer Manufacturing Plant International Journal of Mechanical Engineering and Robotics Research Vol. 3, No. 3 2014 95-102
45 Kumar, P., Kumar, R., Dahmani, P. and Narula, D. RAM Analysis of Some Process Industries: A Critical Literature Review International Journal of Mechanical Engineering and Robotics Research Vol. 3, No. 3 2014 171-179
46 Amit Arya, Jain, S.K. Impacts of Kaizen in small scale industry: A case study” “International Journal of Lean and six-sigma”   2014 22-44
47 Kumar, Ajay. and Sharma,S Role of emulsion and nanotechnology in alternative fuel for CI engine international Journal of Current Engineering and Technology Vol. 4, No.4 2014 2892-2897
48 Gupta, S. and Jain, S.K An application of 5S concept to organize the workplace at a scientific instruments manufacturing company International Journal of Lean Six Sigma Vol. 6, No. 1 2015 73 – 88
49 I.C.Ramola Analysis of performance for high carbon high chromium steel on die sinking EDM using Taguchi Technique National Conference on Engineering, Management and Apparel & Textile Technology, Galaxy Global Group of Institutions 42056 2015 ….
50 Sandeep Kumar & I.C.Ramola  Analysis of Material Removal Rate and Tool Wear Rate for High Carbon High Chromium Steel on Die Sinking EDM Using Taguchi Technique  International Journal of Engineering Research & Management Technology (IJERMT). Volume-II Issue-IV 2015 ..
51 Sandeep Kumar & I.C.Ramola Analysis of surface roughness and material removal rate for high carbon high chromium steel on die sinking EDM using Taguchi Technique International Journal of Engineering Trends and Technology (IJETT) ISSN: 2231-5381. .. 2015 ..
52 Sandeep Kumar & I.C.Ramola Analysis of Material Removal Rate and Tool Wear Rate for high carbon high chromium steel on die sinking EDM using Taguchi Technique International Journal of Engineering Research & Management Technology (IJERMT) Volume-II Issue-IV 2015 ..
53 Amit Arya, Suraj Choudhary Assessing the application of Kaizen principles in Indian small-scale industry” International Journal of Lean Six Sigma Vol. 6, No. 4 2015 369-396
54 Narendra Kumar,PC Tewari Reliability Assessment Tools for Multi-Component Complex Systems :An Overview International Conference on Acadmic Research in Engineering,Mangement andTechnology(ICAREMIT-2015)MJP,Rohilkhand(UP) Feb 21-23 2015 27
55 Suraj Choudhary & Ravi Duhan Effect of activated flux on properties of SS 304 using TIG welding International Journal of Engineering Vol. 28, No. 2 2015 290-295
56 Jain, S.K. and Ahuja I.S Implementation model of ISO 9000 for achieving business performance in Indian manufacturing organisations Internation Journal of Process Management and Benchmarking Vol 5, No. 3 2015 331-351
57  Kamaljit Singh Boparai and Deepak Malik Enhancing the Machining Performance of EDM Process by using RSM  LAP LAMBERT Academic Publishing ISBN-13: 978-3659936739 2016 23377
58 Narendra Kumar,PC Tewari Critical review of RAM tools for the analysis of multi
Component complex systems
International conference on production and industrial engineering, CPIE-2016 held at NIT Jalandhar Dec,19-21 2016 41
59 Sidhant Gupta, S.K.Jain and Gurpinder Singh Experimental Study of MRR, TWR, SR on AISI D2 Steel using Aluminium Electrode on EDM Global Journal of Researches in Engineering: A Mechanical and Mechanics Engineering Vol. 17, No. 1 2017 17-22
60 Ashish and Ashok Rana Parameter Optimization of wire EDM for EN24 Alloy Steel IOSR Journal of Mechanical and Civil Engineering Vol. 14, No. 2 2017 20-26
61 Vipul Wadhwa and Ajay Kumar Thermo Mechanical Analysis of Coated Engine Valve using Finite Element Method International Journal of Engineering, Pure and Applied Sciences Vol. 2, No. 4 2017 139-149
62 Ashwani Verma and Ravindra Kumar Saxena Artificial Microstructure Generation of DP590 Steel using Multi-objective TLBO methodology 6th International Conference on Advances in Mechanical and Robotics Engineering- AMRE 2017, ROME, Italy 9-10 Dec 2017  
63 Narendra Kumar and PC Tewari   8th international conference on industrial engineering and operation management, Bandung, Indonesia March 6-8 2018  
64 Sahil Sharma, Mukesh Gupta and Raj Kumar Experimental analysis and optimization of process parameters in Plasma Arc Cutting Machine of EN-45A Material using Taguchi and ANOVA method World Acadmy of Science, Engineering and Technology (WASET) Vol: 11, No:7 2017  
65 Sahil Sharma, Mukesh Gupta and Raj Kumar A Literature Review on Plasma Arc Cutting Process National Conference on Trend and Advances in Mechanical Engineering (TAME-2017) ISBN 978-935268-269-0 2017 250-255
66 Satbir Singh and Sanddep Singhal Productivity Betterment: Implementation of Clustering with Improved Tooling in Manufacturing International Journal of productivity management and assesment technology Vol.6,No. 2 DOI: 10.4018/IJPMAT.2018070101 2018 1-18
67 Satbir Singh and Sanddep Singhal Productivity Profection and Analysis in Manufacturing Top Cover : Implementing clustering approach with Combination Tooling Journal of Engineering and Technology Vol. 6, No. 2 2018 339-353
68 Singh,S. and Singhal,S. Productivity improvement by reduction of cycle time through implementing Clustering; a case study International Conference, (AIMTDR-2018) at Anna University, CHENNAI, SPRINGER 2018
69 Kumar,S., Sharma,P., and Kumar A. A Review On Effects Of Cerium Oxide On The Performance And Emission Characteristic Of Variable Compression Ratio Ignition Engine Using Emulsion International Journal Of Advance Research And Innovative Ideas In Education Vol. 5, No. 3, 2019 1736-1739
70 Kumar,S., Sharma,P., and Kumar A. Experimental investigation of cerium oxide nanofluid emulsion fuel performance and emission characteristics on variable compression ratio diesel engine. International Journal Of Advance Research And Innovative Ideas In Education Vol. 5, No. 4, 2019 1117-1124
71 Verma, A., & Saxena, R. K. A new method to generate artificial microstructure of dual phase steel using Teacher-Learner Based Optimization Sādhanā, Springer Vol. 44, Issue 4, No. 85 2019 1-18
72 Verma, A., & Saxena, R. K. Determination of Lemaitre damage parameters for DP590 steel using Teacher-Learner based optimization Journal of Physics: Conference Series , IOP Publishing Ltd Vol. 1240, No. 1 2019 1-8
73 Kumar, R., Jain, S.K. and Rana K.S Development of a framework for Agile Manufacturing World Journal of Science, Technology and Sustainable Development, ESCI Vol. 16, No. 4 2019 161-169
74 Kumar, R., Jain, S.K. and Rana K.S An Evaluation of Agile manufacturing initiatives in Indian manufacturing industry International Journal of Quality & Reliability Management,SCOPUS Vol. 37, No. 1 2020 156-187
75 Kumar, R., Jain, S.K. and Rana K.S Agile manufacturing: A literature review and Pareto analysis International Journal of Quality & Reliability Management, SCOPUS Vol. 37, No. 2 2020 207-222
76 Kumar, R., Jain, S.K. and Rana K.S An empirical exploration of agile manufacturing for enhanced business performance in Indian manufacturing industry World Journal of Science, Technology and Sustainable Development, ESCI Vol. 17, No. 1, 2020 90-110
77 Singh,S. and Singhal,S. Productivity improvement by reduction of cycle time through implementing Clustering; a case study Advances in Simulation, Product Design and Development, Springer, Singapore ch. 61 2020 735-752
78 Narendra Kumar, P. C. Tewari, and Anish Sachdeva. Performance modelling and availability analysis of a milk pasteurising system using Petri nets formalism International Journal of Simulation and Process Modelling (Scopus) Vol.15, No.5 2020 401-409
79 Kumar, R., Singh, K. and Jain, S.K. A combined AHP and TOPSIS approach for prioritizing the attributes for successful implementation of Agile Manufacturing International Journal of Productivity and Performance Management (Scopus) Vol. 69, No. 7 2020 1395-1417
80 Kumar, R., Singh, K. and Jain, S.K. An empirical investigation and prioritization of barriers towards implementation of Agile manufacturing in Indian Manufacturing Industry The TQM Journal (Scopus) Vol 33, No. 1 2020 183-203