Research Publications
|
| S.No |
Name of authors |
Title of the paper |
Name of journal/conference |
Volume & No. |
Year and month |
Pages |
| 1 |
Jain, S.K. and Singh H |
Application of Statistical Process Control in Healthcare: A Case Study |
National Conference of Mechanical Engineering, Thapar University, Patiala |
… |
2008 |
148-153 |
| 2 |
Jain, S.K. and Bali, P.L. |
Evaluation of Patient Satisfaction in a Public General Hospital: A Case Study |
National Conference of Modern Trends in Engineering & Sciences |
… |
2009 |
… |
| 3 |
Jain, S.K. and Bali, P.L. |
Application of Statistical Process Control Charts in Healthcare: A Case study |
International Journal of Science Technology & management |
Vol. 2, No. 2 |
2011 |
74-84 |
| 4 |
Prince, Satnam Singh, Mukesh Verma and Sarabjot Singh |
Micromechanical Behavior of Polymer Composite Material with Sharp and Curved Fiber/Matrix Interface using Finite Element Analysis |
International Journal of Applied Engineering Research, |
Vol.- 6 Issue – 18 |
2011 |
3186 – 3189 |
| 5 |
Satnam Singh and Prince |
Vibration Characteristics of Thermoplastic Composites |
American Institute of Physics, |
Vol.-1414 |
2011 |
211-214. |
| 6 |
Prince, Satnam Singh and Vivek Chauhan |
Analysis of Polymer Composite with Varying Volume Fraction using Finite Element Modeling at Micro Level |
PSAT-2011 at JMIT, Radaur. |
… |
2011 |
…. |
| 7 |
Amit Kumar Haldar, Satnam Singh and Prince |
Vibration Characteristics of Thermoplastic Composites |
ICM2ST-2011 Jaipur. |
… |
2011 |
…. |
| 8 |
Prince, Satnam Singh, Mukesh Verma and Sarabjot Singh |
Micromechanical Behavior of Polymer Composite Material with Sharp and Curved Fiber/Matrix Interface using Finite Element Analysis |
IETET-2011 Kurukshetra. |
… |
2011 |
…. |
| 9 |
Jain, S.K. and Ahuja, I.S. |
An evaluation of ISO 9000 initiatives in Indian industry for Enhanced manufacturing performance |
International Journal of Productivity and Performance Management |
Vol. 61, No.7 |
2012 |
778-804 |
| 10 |
Jain, S.K. and Ahuja, I.S. |
ISO 9000 Quality Management System: literature review and directions |
International Journal of Technology, Policy and Management, |
Vol. 12, No. 4 |
2012 |
312-343 |
| 11 |
Jain, S.K. and Ahuja, I.S. |
Application of analytical hierarchy process for justification of ISO 9000 implementation in manufacturing organisations |
International Journal of Business Continuity and Risk Management |
Vol. 3, No. 3, |
2012 |
221–233 |
| 12 |
Prince, Mukesh Verma and Sarabjot Singh |
Analysis of Failure Phenomena in Multi- Fiber polymer composite material at varying volume fraction using Finite Element Modeling |
International Journal of Engineering Research and Application, |
Vol.- 2 Issue- 2 |
2012 |
287-291. |
| 13 |
Satnam Singh, Prince and Amit Kumar |
Micromechanical Behaviour of Flexible Pavement under Combined Effect of Wheel and Thermal Load Condition |
NITTTR Chandigarh. |
…. |
2012 |
…. |
| 14 |
Prince, Sarabjot Singh and Satnam Singh |
Methods And Models For Failure Analysis of Fiber Reinforced Composites: A Review |
ICT-2012 at SSIET, Derabassi. |
…. |
2012 |
…. |
| 15 |
Prince & Satnam Singh |
Finite Element Analysis and Experimental Investigation of Debonding Behavior of Steel Fiber Reinforced Epoxy |
ICAM-2012 IIT (BHU), Varanasi. |
…. |
2012 |
…. |
| 16 |
Jain, S.K. and Ahuja, I.S. |
Strategies and Success factors for overcoming challenges in ISO 9000 implementation in Indian manufacturing industry |
International Journal of Technology, Policy and Management |
Vol. 13, No. 2 |
2013 |
121-139 |
| 17 |
Gupta, S. and Jain, S.K. |
Implementation of 5S in a Micro Scale Industry: A case study |
International Conference on Advances in Mechanical and Computer Engineering, GITM |
…. |
2013 |
83-86 |
| 18 |
Singh, S., Kumar, P. and Jain, S.K |
An experimental and numerical investigation of mechanical properties of glass fiber reinforced epoxy composites |
Advanced Materials Letters |
Vol. 4, No. 7 |
2013 |
567-572 |
| 19 |
Jain, S.K. and Ahuja I.S |
Evaluation of ISO 9000 implementation aptness for Indian manufacturing industries using fuzzy simulation |
International Journal of Business Continuity and Risk Management |
Vol. 4, No. 2 |
2013 |
139–154 |
| 20 |
Jain, S.K. and Malik, A.K |
Relevance of lean manufacturing in Indian small scale industry |
International Journal of Business Continuity and Risk Management |
Vol. 4, No.2 |
2013 |
93–107 |
| 21 |
Gupta, S. and Jain, S.K |
A Literature Review of Lean Manufacturing |
International Journal of Management Science and Engineering Management |
Vol. 8, No.4 |
2013 |
241-249 |
| 22 |
Er.Satbir Singh, Dr. B.S Pabla, Dr. S.S Banwait |
IMPROVEMENT & ANALYSIS OF PRODUCTIVITY |
National Conference on Advances in Manufacturing Technology,NTTTR |
March 14 – 15, |
2013 |
…. |
| 23 |
I.C.Ramola |
Green manufacturing process towards agility”, National conference on Advancements in Mechanical Manufacturing Methods |
National Conference at Haryana Institute of Technology, Bahadurgarh. |
…. |
2013 |
…. |
| 24 |
I.C.Ramola |
Implementation of lean Manufacturing in Indian MSMEs: A literature review”, National conference on Advancements in Mechanical Manufacturing Methods |
National Conference at Haryana Institute of Technology, Bahadurgarh. |
…. |
2013 |
…. |
| 25 |
Bhupinder Singh & I.C.Ramola |
Study of mechanical properties for aluminium alloy (6061) by using different tool shapes in friction stir Welding” |
International Journal of Research in Engineering & Applied Sciences |
Volume 3, Issue 10, |
2013 |
|
| 26 |
Ashok Kumar, Gurpinder Singh |
Investigation of Mechanical Properties of 6063 Aluminium Alloy After Thixoforming Process |
International Journal of Mechanical Engineering and Research |
|
2013 |
923-927 |
| 27 |
Ashok Kumar, Gurpinder Singh |
Evaluation of Flexural Strength of Epoxy Polymer Concrete with Red Mud and Fly Ash |
International Journal of Current Engineering and Technology |
Vol.3, No.5 |
2013 |
1799-1803 |
| 28 |
Prince, Satnam Singh and Pardeep Kumar |
Experimental investigations and finite element analysis of debonding behavior of steel fibre reinforced epoxy |
Elixir International Journal |
Vol. – 57 |
2013 |
14052- 14054 |
| 29 |
Pardeep Kumar, Narendra Kumar, Satnam Singh, PC Tewari |
Decision Support System for Critical Subsystems of a Beverage Plant |
CPIE2013,NIT Jalandhar |
CPIE2013_1509, March |
2013 |
…. |
| 30 |
Rupen Trehan, Satnam Singh and Manish Garg |
Optimization of mechanical properties of polyester hybrid composite laminate using Taguchi |
Journal of Materials Design and Applications |
Part L |
2013 |
…. |
| 31 |
Suraj Choudhary, & Parveen Saini |
Analysis of MRR and SR with different electrode for SS 316 on Die-Sinking EDM using Taguchi techniques |
Global Journals of Research in Mechanical & Mechanics Engineering |
Vol. 13, Issue 3 |
2013 |
…. |
| 32 |
Suraj Choudhary & Parveen Saini |
Analysis of machining parameters for optimization of surface roughness of Stainless Steel AISI 202 in CNC face milling process |
International Journal of Mechanical Engineering |
Vol.2, Issue 3. |
2013 |
…. |
| 33 |
Kumar, R., Gupta, R.K., and Verma, M |
Performance analysis of a Process Industry to provide Decision Support System |
International Journal of Engineering Research and Technology, NCAEM-2013 Conference Proceedings |
— |
2013 |
137-142 |
| 34 |
Amit Arya, Jain, S.K. |
“Benefits of using ‘5S’ in small scale industry : A case Study” |
International Conference of Advance in Mechanical And Computers |
Jan |
2013 |
– |
| 35 |
Amit Arya, Jain, S.K. |
“A case study of achieving business excellence by implementing 5S in small scale industry” |
International Conference on “Sustainable business growth in turbulent times: opportunities and challenges” |
…. |
2013 |
– |
| 36 |
Anil Sharma ; Dr. S.K. Jain ; Dr. B.S. Pabla |
“ Utilization of Waste by Lean Manufacturing “ |
National Conference at NITTTR Chandigarh. |
May |
2013 |
4 |
| 37 |
Gupta, S. and Jain, S.K. |
The 5S and kaizen concept for overall improvement of the organisation: a case study |
International Journal of Lean Enterprise Research |
Vol. 1, No. 1 |
2014 |
22-40 |
| 38 |
Sodhi, G.S, Jain, S.K. and Ahuja, I.S. |
The Evaluation of Contributions of Strategic Implementation of ISO Quality Systems in Manufacturing Organizations |
International Conference on Recent Trends in Electronics, Data Communication and Computing,Gurukul Vidyapeet |
Vol. 1, No. 2 |
2014 |
330-332 |
| 39 |
Ashok Kumar, Gurpinder Singh |
Investigation into the Machining Characteristics of Composites using Chemical Assisted Ultrasonic Machining Process |
International Journal of Current Engineering and Technology |
Vol.4, No.3 |
2014 |
1260-1264 |
| 40 |
Ashwani kumar, Deepak K. Choudhary and Prince |
Mechanical Properties of Epoxy Based Hybrid Composite of Glass and Banana Fiber |
Journal of Manufacturing Engineering |
Vol.- 9 Issue- 1 |
2014 |
049-054. |
| 41 |
Narendra Kumar,Anish Sachdeva |
Green Manufacturing Process towards Agility:A Need of Hour |
Midas Touch International Journal Of Commerce, Management And Technology.A Monthly Referred E-Journal |
ISSN: 2320 – 7787 , Vol-2, No. 1 |
2014 |
188-193 |
| 42 |
Narendra Kumar, Vikas Chawla |
Automation and Greening:Two Important Pillars of Future Manufacturing Systems |
National Conference on Recent Advances in Science & Technology(NCST-2014) BKIT,Bhalki(Karnatka) |
E-055/1 Mar. 22-23 |
2014 |
…. |
| 43 |
Suraj Choudhary & Ravi Duhan |
Effect of different fluxes on hardness and microstructure of SS 304 in GTAW |
International Journal of Mechanical Engineering |
Vol.3, Issue 4, |
2014 |
|
| 44 |
Kumar, R., Kumar, P., Nishant and Joshi, A |
Maintenance Strategy for Beer Manufacturing Plant |
International Journal of Mechanical Engineering and Robotics Research |
Vol. 3, No. 3 |
2014 |
95-102 |
| 45 |
Kumar, P., Kumar, R., Dahmani, P. and Narula, D. |
RAM Analysis of Some Process Industries: A Critical Literature Review |
International Journal of Mechanical Engineering and Robotics Research |
Vol. 3, No. 3 |
2014 |
171-179 |
| 46 |
Amit Arya, Jain, S.K. |
Impacts of Kaizen in small scale industry: A case study” |
“International Journal of Lean and six-sigma” |
|
2014 |
22-44 |
| 47 |
Kumar, Ajay. and Sharma,S |
Role of emulsion and nanotechnology in alternative fuel for CI engine |
international Journal of Current Engineering and Technology |
Vol. 4, No.4 |
2014 |
2892-2897 |
| 48 |
Gupta, S. and Jain, S.K |
An application of 5S concept to organize the workplace at a scientific instruments manufacturing company |
International Journal of Lean Six Sigma |
Vol. 6, No. 1 |
2015 |
73 – 88 |
| 49 |
I.C.Ramola |
Analysis of performance for high carbon high chromium steel on die sinking EDM using Taguchi Technique |
National Conference on Engineering, Management and Apparel & Textile Technology, Galaxy Global Group of Institutions |
42056 |
2015 |
…. |
| 50 |
Sandeep Kumar & I.C.Ramola |
Analysis of Material Removal Rate and Tool Wear Rate for High Carbon High Chromium Steel on Die Sinking EDM Using Taguchi Technique |
International Journal of Engineering Research & Management Technology (IJERMT). |
Volume-II Issue-IV |
2015 |
.. |
| 51 |
Sandeep Kumar & I.C.Ramola |
Analysis of surface roughness and material removal rate for high carbon high chromium steel on die sinking EDM using Taguchi Technique |
International Journal of Engineering Trends and Technology (IJETT) ISSN: 2231-5381. |
.. |
2015 |
.. |
| 52 |
Sandeep Kumar & I.C.Ramola |
Analysis of Material Removal Rate and Tool Wear Rate for high carbon high chromium steel on die sinking EDM using Taguchi Technique |
International Journal of Engineering Research & Management Technology (IJERMT) |
Volume-II Issue-IV |
2015 |
.. |
| 53 |
Amit Arya, Suraj Choudhary |
Assessing the application of Kaizen principles in Indian small-scale industry” |
International Journal of Lean Six Sigma |
Vol. 6, No. 4 |
2015 |
369-396 |
| 54 |
Narendra Kumar,PC Tewari |
Reliability Assessment Tools for Multi-Component Complex Systems :An Overview |
International Conference on Acadmic Research in Engineering,Mangement andTechnology(ICAREMIT-2015)MJP,Rohilkhand(UP) |
Feb 21-23 |
2015 |
27 |
| 55 |
Suraj Choudhary & Ravi Duhan |
Effect of activated flux on properties of SS 304 using TIG welding |
International Journal of Engineering |
Vol. 28, No. 2 |
2015 |
290-295 |
| 56 |
Jain, S.K. and Ahuja I.S |
Implementation model of ISO 9000 for achieving business performance in Indian manufacturing organisations |
Internation Journal of Process Management and Benchmarking |
Vol 5, No. 3 |
2015 |
331-351 |
| 57 |
Kamaljit Singh Boparai and Deepak Malik |
Enhancing the Machining Performance of EDM Process by using RSM |
LAP LAMBERT Academic Publishing |
ISBN-13: 978-3659936739 |
2016 |
23377 |
| 58 |
Narendra Kumar,PC Tewari |
Critical review of RAM tools for the analysis of multi
Component complex systems |
International conference on production and industrial engineering, CPIE-2016 held at NIT Jalandhar |
Dec,19-21 |
2016 |
41 |
| 59 |
Sidhant Gupta, S.K.Jain and Gurpinder Singh |
Experimental Study of MRR, TWR, SR on AISI D2 Steel using Aluminium Electrode on EDM |
Global Journal of Researches in Engineering: A Mechanical and Mechanics Engineering |
Vol. 17, No. 1 |
2017 |
17-22 |
| 60 |
Ashish and Ashok Rana |
Parameter Optimization of wire EDM for EN24 Alloy Steel |
IOSR Journal of Mechanical and Civil Engineering |
Vol. 14, No. 2 |
2017 |
20-26 |
| 61 |
Vipul Wadhwa and Ajay Kumar |
Thermo Mechanical Analysis of Coated Engine Valve using Finite Element Method |
International Journal of Engineering, Pure and Applied Sciences |
Vol. 2, No. 4 |
2017 |
139-149 |
| 62 |
Ashwani Verma and Ravindra Kumar Saxena |
Artificial Microstructure Generation of DP590 Steel using Multi-objective TLBO methodology |
6th International Conference on Advances in Mechanical and Robotics Engineering- AMRE 2017, ROME, Italy |
9-10 Dec |
2017 |
|
| 63 |
Narendra Kumar and PC Tewari |
|
8th international conference on industrial engineering and operation management, Bandung, Indonesia |
March 6-8 |
2018 |
|
| 64 |
Sahil Sharma, Mukesh Gupta and Raj Kumar |
Experimental analysis and optimization of process parameters in Plasma Arc Cutting Machine of EN-45A Material using Taguchi and ANOVA method |
World Acadmy of Science, Engineering and Technology (WASET) |
Vol: 11, No:7 |
2017 |
|
| 65 |
Sahil Sharma, Mukesh Gupta and Raj Kumar |
A Literature Review on Plasma Arc Cutting Process |
National Conference on Trend and Advances in Mechanical Engineering (TAME-2017) |
ISBN 978-935268-269-0 |
2017 |
250-255 |
| 66 |
Satbir Singh and Sanddep Singhal |
Productivity Betterment: Implementation of Clustering with Improved Tooling in Manufacturing |
International Journal of productivity management and assesment technology |
Vol.6,No. 2 DOI: 10.4018/IJPMAT.2018070101 |
2018 |
1-18 |
| 67 |
Satbir Singh and Sanddep Singhal |
Productivity Profection and Analysis in Manufacturing Top Cover : Implementing clustering approach with Combination Tooling |
Journal of Engineering and Technology |
Vol. 6, No. 2 |
2018 |
339-353 |
| 68 |
Singh,S. and Singhal,S. |
Productivity improvement by reduction of cycle time through implementing Clustering; a case study |
International Conference, (AIMTDR-2018) at Anna University, CHENNAI, SPRINGER |
— |
2018 |
— |
| 69 |
Kumar,S., Sharma,P., and Kumar A. |
A Review On Effects Of Cerium Oxide On The Performance And Emission Characteristic Of Variable Compression Ratio Ignition Engine Using Emulsion |
International Journal Of Advance Research And Innovative Ideas In Education |
Vol. 5, No. 3, |
2019 |
1736-1739 |
| 70 |
Kumar,S., Sharma,P., and Kumar A. |
Experimental investigation of cerium oxide nanofluid emulsion fuel performance and emission characteristics on variable compression ratio diesel engine. |
International Journal Of Advance Research And Innovative Ideas In Education |
Vol. 5, No. 4, |
2019 |
1117-1124 |
| 71 |
Verma, A., & Saxena, R. K. |
A new method to generate artificial microstructure of dual phase steel using Teacher-Learner Based Optimization |
Sādhanā, Springer |
Vol. 44, Issue 4, No. 85 |
2019 |
1-18 |
| 72 |
Verma, A., & Saxena, R. K. |
Determination of Lemaitre damage parameters for DP590 steel using Teacher-Learner based optimization |
Journal of Physics: Conference Series , IOP Publishing Ltd |
Vol. 1240, No. 1 |
2019 |
1-8 |
| 73 |
Kumar, R., Jain, S.K. and Rana K.S |
Development of a framework for Agile Manufacturing |
World Journal of Science, Technology and Sustainable Development, ESCI |
Vol. 16, No. 4 |
2019 |
161-169 |
| 74 |
Kumar, R., Jain, S.K. and Rana K.S |
An Evaluation of Agile manufacturing initiatives in Indian manufacturing industry |
International Journal of Quality & Reliability Management,SCOPUS |
Vol. 37, No. 1 |
2020 |
156-187 |
| 75 |
Kumar, R., Jain, S.K. and Rana K.S |
Agile manufacturing: A literature review and Pareto analysis |
International Journal of Quality & Reliability Management, SCOPUS |
Vol. 37, No. 2 |
2020 |
207-222 |
| 76 |
Kumar, R., Jain, S.K. and Rana K.S |
An empirical exploration of agile manufacturing for enhanced business performance in Indian manufacturing industry |
World Journal of Science, Technology and Sustainable Development, ESCI |
Vol. 17, No. 1, |
2020 |
90-110 |
| 77 |
Singh,S. and Singhal,S. |
Productivity improvement by reduction of cycle time through implementing Clustering; a case study |
Advances in Simulation, Product Design and Development, Springer, Singapore |
ch. 61 |
2020 |
735-752 |
| 78 |
Narendra Kumar, P. C. Tewari, and Anish Sachdeva. |
Performance modelling and availability analysis of a milk pasteurising system using Petri nets formalism |
International Journal of Simulation and Process Modelling (Scopus) |
Vol.15, No.5 |
2020 |
401-409 |
| 79 |
Kumar, R., Singh, K. and Jain, S.K. |
A combined AHP and TOPSIS approach for prioritizing the attributes for successful implementation of Agile Manufacturing |
International Journal of Productivity and Performance Management (Scopus) |
Vol. 69, No. 7 |
2020 |
1395-1417 |
| 80 |
Kumar, R., Singh, K. and Jain, S.K. |
An empirical investigation and prioritization of barriers towards implementation of Agile manufacturing in Indian Manufacturing Industry |
The TQM Journal (Scopus) |
Vol 33, No. 1 |
2020 |
183-203 |
